Description
The electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately one second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence.
- Fully submersible pump - 1100 US gallons per hour - 69 litres per minute
- Higher fl ow - optimised impeller to provide greater fl ow at the same amperage as previous model
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic
suppression (EMC) - 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge. Please note - using the check valve will reduce the rated output flow.
- Threaded discharge port - gives easier installation and maintenance. Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact - 120mm Height x 74mm Width x 64mm depth - not incl. discharge
- 3.7 amp draw @ 12v DC. 1.8 amp @24v. Consumes only 0.25 amps per day.
- Threaded hose outlets supplied for both 25mm (1”) and 28mm (1 1/8”) hose