:

Rule 500 Submersible Bilge Pump Model 25DA

$49.95 $34.16
(You save $15.79)
(No reviews yet) Write a Review
SKU:
RWB801
Shipping:
Calculated at Checkout
Rule 500 Bilge Pump

Next generation compact submersible 500 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extemely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump - requires a Rule float switch to operate automatically. Please note - using the included check valve will reduce the output flow of the pump. 

  • 3 year limited warranty.
  • Fully submersible pump - 500 US gallons per hour - 31 litres per minute
  • Higher flow - optimised impeller to provide greater flow at the same amperage as previous model
  • High efficiency, low amp draw, ignition protected motor includes true Electromagnetic suppression (EMC)
  • 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
  • Built-In thermal cut-out (TCO) in the motor provides additonal protection for pump & vessel
  • Backflow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge. Please note - using the check valve will reduce the rated output flow.
  • Threaded discharge port - gives easier installation and maintenance. Discharge hose port is included with each pump
  • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
  • Compact - 99mm Height x 74mm Width x 64mm depth - not including discharge
  • 1.6 amp draw @ 12v DC
  • Threaded hose outlet suits 20mm (3/4") hose. 1 x straight port provided.